13C chemical shift tensors in MOF α-Mg3(HCOO)6: Which component is more sensitive to host-guest interaction?

Metal–organic frameworks (MOFs) are a class of important porous materials with many current and potential applications. Their applications almost always involve the interaction between host framework and guest species. Therefore, understanding of host–guest interaction in MOF systems is fundamentally important. Solid-state NMR spectroscopy is an excellent technique for investigating host–guest interaction as it provides information complementary to that obtained from X-ray diffraction. In this work, using MOF α-Mg₃(HCOO)₆ as an example, we demonstrated that ¹³C chemical shift tensor of organic linker can be utilized to probe the host–guest interaction in MOFs. Obtaining ¹³C chemical shift tensor components (δ₁₁, δ₂₂, and δ₃₃, where δ₁₁ ≥ δ₂₂ ≥ δ₃₃) in this MOF is particularly challenging as there are six coordinatively equivalent but crystallographically non-equivalent carbons in the unit cell with very similar local coordination environment. Two-dimensional magic-angle-turning experiments were employed to measure the ¹³C chemical shift tensors of each individual crystallographically non-equivalent carbon in three microporous α-Mg₃(HCOO)₆ samples with different guest species. The results indicate that the δ₂₂ component (with its direction approximately being co-planar with the formate anion and perpendicular to the C−H bond) is more sensitive to the adsorbate molecules inside the MOF channel due to the weak C−H···O hydrogen bonding or the ring current effect of benzene. The ¹³C isotropic chemical shift, on the other hand, seems much less sensitive to the subtle changes in the local environment around formate linker induced by adsorption. The approach described in this study may be used in future studies on host–guest interaction within MOFs.     

Cobalt-Catalyzed Regio- and Stereoselective Hydroboration of Allenes

An efficient pincer-ligand-based cobalt-complex-catalyzed allene hydroboration affording Z-allylic boronates is described. The reaction demonstrates an excellent regio- as well as Z-stereoselectivity and a wide substrate scope that tolerates many functional groups. Based on solvent-assisted electrospray ionization mass spectrometry (SAESI-MS) studies, a rationale for the cobalt-catalyzed hydroboration involving the highly selective insertion of an allene into the Co−H bond to form Z-allylic cobalt intermediates is proposed.     

Heterotrimetallic Mixed-Valent Molecular Precursors Containing Periodic Table Neighbors: Assignment of Metal Positions and Oxidation States

A known trinuclear structure was used to design the heterobimetallic mixed-valent, mixed-ligand molecule [Co^II(hfac)₃−Na−Co^III(acac)₃] ( 1 ). This was used as a template structure to develop heterotrimetallic molecules [Co^II(hfac)₃−Na−Fe^III(acac)₃] ( 2 ) and [Ni^II(hfac)₃−Na−Co^III(acac)₃] ( 3 ) via isovalent site-specific substitution at either of the cobalt positions. Diffraction methods, synchrotron resonant diffraction, and multiple-wavelength anomalous diffraction were applied beyond simple structural investigation to provide an unambiguous assignment of the positions and oxidation states for the periodic table neighbors in the heterometallic assemblies. Molecules of 2 and 3 are true heterotrimetallic rather than a statistical mixture of two heterobimetallic counterparts. Trinuclear platform 1 exhibits flexibility in accommodating a variety of di- and trivalent metals, which can be further utilized in the design of molecular precursors for the NaMM′O₄ functional oxide materials.     

第三族金属氧化物离子对二氧化碳转化的红外光谱研究

本文利用红外光解离光谱研究了第三族金属氧化物离子对二氧化碳分子的转化机制. 研究表明，对于[ScO(CO₂)_n]⁺体系，在n≤4时，形成了溶剂化结构；在n=5时，形成了碳酸盐结构，实现了二氧化碳的转化. 对于[YO(CO₂)_n]⁺体系，需要4个二氧化碳分子就可以实现二氧化碳的转化. 而在[YO(CO₂)_n]⁺体系中，只发现了溶剂化结构，没有观察到碳酸盐结构. 理论计算表明，[YO(CO₂)_n]⁺体系拥有最小的溶剂化结构向碳酸盐结构转化能垒，[LaO(CO₂)_n]⁺体系拥有最大的溶剂化结构向碳酸盐结构转化能垒. 本文从分子水平揭示了不同金属氧化物离子对二氧化碳分子转化的影响规律.     

阴离子-π复合物(I-·C6F6)的成键分析

最近Anst?ter, et al. 发表了对阴离子-π复合物(I^-·C₆F₆)的第一个定量谱学测量[J. Am. Chem. Soc. 141, 6132 (2019)]，认为成键作用中相关作用占41%，静电作用占23%，得出相关作用占主导的结论. 本研究表明，该文献的“静电作用”中混入了Pauli排斥作用，后者在数值上抵消了前者的作用. 在复合物I^-·C₆F₆中，发现静电作用是相关作用的两倍多，因而阴离子-π复合物中仍应是静电作用占主导.     

基于混合空穴注入层的湿法制备高效蓝光热激活延迟有机发光二极管

在溶液法制备有机电致发光器件(OLEDs)的研究中, PEDOT∶PSS由于具有较好的成膜性与高透光性而常被用作器件的空穴注入层。但相关研究表明, PEDOT∶PSS本身稳定性较差以及功函数较低,这使得溶液法制备OLEDs的性能差且不稳定。蓝色作为全彩色的三基色之一,制备高效的蓝光器件对于实现高质量显示器件和固态照明装置必不可少。而目前溶液法制备蓝光OLEDs的器件效率普遍较差,针对此问题,本文利用传统的蓝光热激活延迟荧光发光(TADF)材料DMAC-DPS作为发光层,用溶液法制备了蓝光TADF OLEDs,通过在PEDOT∶PSS中掺杂PSS-Na制备混合空穴注入层(mix-HIL)来提高空穴注入层的功函数,研究其对于蓝光TADF OLEDs器件性能的影响。首先在PEDOT∶PSS水溶液中掺入不同体积的PSS-Na溶液,在相同条件下旋涂制膜,进行器件制备。通过观测各个实验组器件的电致发光(EL)光谱,发现掺入PSS-Na后器件EL谱存在光谱蓝移的现象,这是由于掺入PSS-Na水溶液后, mix-HIL层的厚度有所降低,使得在微腔效应作用下, EL光谱发生蓝移。通过对比各组器件的电流密度-电压-亮度(J-V-L)曲线及其计算所得器件的电流效率,结果显示随着PSS-Na的掺入,器件的亮度和电流都有所增大,器件的电流效率也得到了提升,当掺杂比例为0.5∶0.5(PEDOT∶PSS/PSS-Na)时提升幅度最大(亮度提升86.7%,电流效率提升34.3%)。通过在瞬态电致发光测试过程中施加或撤去驱动电压观测了器件EL强度的变化,分析了在混合空穴注入层/发光层(mix-HIL/EML)界面处的电荷积累情况。实验证明,通过在PEDOT∶PSS中掺杂PSS-Na制备mix-HIL获得了蓝光TADF OLEDs器件性能的提升,这是一个获得高效率溶液法制备OLEDs的可行方法。     

On-chip multiphoton Greenberger–Horne–Zeilinger state based on integrated frequency combs

One of the most important multipartite entangled states, Greenberger–Horne–Zeilinger state (GHZ), serves as a fundamental resource for quantum foundation test, quantum communication and quantum computation. To increase the number of entangled particles, significant experimental efforts should been invested due to the complexity of optical setup and the difficulty in maintaining the coherence condition for high-fidelity GHZ state. Here, we propose an ultra-integrated scalable on-chip GHZ state generation scheme based on frequency combs. By designing several microrings pumped by different lasers, multiple partially overlapped quantum frequency combs are generated to supply as the basis for on-chip polarization-encoded GHZ state with each qubit occupying a certain spectral mode. Both even and odd numbers of GHZ states can be engineered with constant small number of integrated components and easily scaled up on the same chip by only adjusting one of the pump wavelengths. In addition, we give the on-chip design of projection measurement for characterizing GHZ states and show the reconfigurability of the state. Our proposal is rather simple and feasible within the existing fabrication technologies and we believe it will boost the development of multiphoton technologies.     

TADF激基复合物主体材料提升溶液法制备蓝色荧光有机发光二极管的效率

为了提升溶液法制备的蓝色荧光有机发光二极管(OLEDs)的效率,采用了基于热激活延迟发光(TADF)的激基复合物作为主体材料。TADF激基复合物主体可以利用反向系间窜跃上转换形成单线态激子并将能量传递到客体,从而可以同时利用发光层中的三线态激子和单线态激子,以提升蓝色荧光器件的效率。选择蓝色荧光材料1-4-Di-[4-(N,N-diphenyl)amino]styryl-benzene(DSA-ph)作为客体发光材料,4,4′,4″-T-ris(carbazol-9-yl)triphenylamine(TCTA)掺杂1,3,5-Tri(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl)(TPBi)作为热激活延迟荧光激基复合物主体,通过溶液法制备了蓝色荧光OLEDs。通过测试TCTA,TPBi以及TCTA掺杂TPBi的光致发光光谱发现,与TCTA和TPBi相比,TCTA掺杂TPBi的光致发光谱(PL)发生了明显的红移(峰值波长变为437 nm),而且光谱变宽,证明了TCTA∶TPBi激基复合物的形成。通过对于DSA-ph掺杂激基复合物主体的薄膜与DSA-ph掺杂poly(methyl methacrylate)(PMMA)的薄膜进行PL测试发现,两者发光峰相同,都是来自DSA-ph的发光,说明激基复合物主体将能量传递到了DSA-ph;DSA-ph的吸收光谱与激基复合物主体的PL光谱存在很大重叠,说明激基复合物主体与DSA-ph的能量传递非常有效;通过对激基复合物主体掺杂不同浓度客体的薄膜进行瞬态PL衰减测试发现,与纯DSA-ph的寿命相比,DSA-ph掺杂激基复合物主体之后其寿命会延长,纯DSA-ph的寿命只有1.19 ns,DSA-ph掺杂激基复合物主体的荧光衰减曲线与激基复合物主体的荧光衰减曲线相似,这进一步证明了激基复合物主体将能量传递到了DSA-ph。研究了主体引入以及DSA-ph掺杂浓度对器件性能的影响。对于器件的亮度、电流密度、电压、电流效率、电致发光光谱等参数进行了测试,与不采用激基复合物主体的器件相比,采用激基复合物主体的器件性能明显改善,在DSA-ph掺杂浓度为10%时,器件亮度从2133.6 cd·m^-2提升到了3597.6 cd·m^-2,器件效率从1.44 cd·A-1提升到了3.15 cd·A-1,发光峰只有来自DSA-ph的发光。采用TADF激基复合物主体的方法有潜力实现溶液法制备的高效蓝色荧光OLEDs。     

Enantioselective Copper‐Catalyzed Azide–Alkyne Click Cycloaddition to Desymmetrization of Maleimide‐Based Bis(alkynes)

A copper catalyst system derived from TaoPhos and CuF₂ was used successfully for catalytic asymmetric Huisgen [3+2] cycloaddition of azides and alkynes to give optically pure products containing succinimide‐ and triazole‐substituted quaternary carbon stereogenic centers. The desired products were obtained in good yields (60–80 %) and 85:15 to >99:1 enantiomeric ratio (e.r.) in this click cycloaddition reaction.